2016 – Various – Off-Road Wheelchair – Team 4
OFF-ROAD WHEELCHAIR
Cody and his dad Ron fishing at their family camp in Stetson, ME
ABOUT THE PROJECT
Over the course of the next two semesters, our team will be working alongside the O’Brion family to design and build a fully electric motorized off-road wheelchair for Cody O’Brion. Cody suffered a brain injury as a child, and has been confined to a wheelchair with very limited mobility. Cody and his family enjoy spending time in the outdoors, but over the years have struggled to find an efficient means to do so. The wheelchair will allow the family to bring Cody to new and exciting areas. The fall semester will consist of the design process, which will be followed by the fabrication process in the spring semester. During this time, our team will be responsible for raising the funds, and acquiring all the necessary materials to complete the project. We will be consulting with professional engineers throughout the design and fabrication process to ensure the wheelchair is a safe and made to the highest quality. We strive to develop a safe and efficient wheelchair that will meet all of Cody’s, and the O’Brion family’s needs.
DESIGN CRITERIA
This project is to design and fabricate an electrically operated and motorized wheelchair that is design specifically for the assisted mobility of handicapped personnel who are unable to physically and/or mental propel themselves. The design will be created with the O’Brion family in mind. The wheelchair is to be design to have the ability to negotiate terrain which is present in woodland trails. These woodland trails will be defined as an unimproved dirt roads which may consist of obstacles such as roots, potholes, mud, rocks, vegetation, bridges and prolonged elevated grades. The chair is designed to be operated by a second party who will be walking behind the chair, and it will allow for that individual to give minimal physical effort to operate the system. In the event that that chair is moving over level ground or even over a decline the second part should maintain the ability to push the chair with minimal resistance.
SAFETY:
The number one goal for the proposed design is to keep safety in mind. The wheelchair will be required to provide specific safety criteria as specified by the O’Brion family. The family has requested the following:
- The wheelchair must only have a maximum speed of 5 mph and is to be controlled from behind by the operator.
- There will be an optional control to allow the passenger to operate the system (with no control of speed and limited to only forward movement) which can only be engaged by the operator.
- The wheelchair will be required to have lights for times of limited visibility and the lighting system must be on an independent circuit powered by its own independent power source to not draw additional power during system operation and compromise battery life or decrease overall system power.
- The wheelchair is required to have an emergency kill switch which will immediately disable mobility of the system.
- There must be a restraint system in place to secure the passengers.
- The wheelchair must have a reliable and efficient braking system. This must also be tied into the emergency stop button. There should be a primary and contingency means for stopping the system, one electrical and one mechanical
DIMENSIONAL CONSTRAINTS:
- The wheelchair needs to be designed so that it has the ability to be transported by vehicle.
- The entire wheelchair must not exceed a width of 30 inches, a length of 49 inches or a height of 56 inches.
- The wheelchair needs to be designed to be able to withhold a passenger’s with a weight of 150 pounds. We plan to design the wheelchair to move much more weight than that.
COMFORT:
- Because the families plan for using this wheelchair is on outdoor trails they would like us to ensure that the chair is comfortable.
- The chair will need to have an ergonomic seat design and have a comfortable backrest angle, if not adjustable.
- The wheelchair must be designed to be loaded from the right side (as if you were seated) and must incorporate a passenger loading assistance system.
- Finally and probably the most challenging will be to design the chair to incorporate a suspension system for the seated passenger to allow them to be able to ride comfortably over potholes, rocks, roots and other areas which would otherwise cause for an uncomfortable ride.
OPERATION AND MAINTENANCE:
- A considerable amount of the system design will be determined by the parts in which it is built from.
- The wheelchair needs to be built with standardized parts when available to help with long term operation and maintenance.
- The parts that cannot be standardized must be design so they will not fail which would cause stop the system from running.
- Cost needs to be in mind for all future repairs needed and all maintenance which needs to be conducted.
- The components of the system that will be specified to fail over a specified period of time (i.e. batteries) must be annotated and information on acquiring new parts needs to be available.
WEEKLY BLOG
24APR2016- The wheelchair has been assembled, and testing has begun. We are working to finalize the wiring harness, and adjust the acceleration to slowly ramp, and stop the jerking motion when accelerating and decelerating. We will begin painting this week, and adding the final accessories.
17APR2016- We will attach the handle bars, and begin assembling the mechanical brake this week. We will begin to finalize the wiring harness, with a built in safety shutoff switch. We are also determining how to make the electronics as water resistant as possible. Below is a picture of the motors and wiring harness.
Motor Testing
11APR2016- We continue to assemble the wheelchair in its entirety. We have been working on incorporating the leg rests, castor legs, and ensuring the chair is level. We have also began to prepare the wiring harness, and will hopefully hook up the electronics for a rough test in the following week.
Leg Rests and Castors
04APR2016- This week will mount the front wheels, axles and sprockets to the frame. We will also weld the leg rests on to the seat mount. Lastly, we will weld the cross members into place, solidifying our frame. This will also allow us to mount our seat to the frame. We will begin to fit up the motors, and prepare the moor mounts to be permanently fixed to the frame.
Wheels and Sprockets
Fitting up Seat and Wheels
27MAR2016- The frame has been welded to roughly 80% completion. The remaining steps include mounting the caster legs, and cross members to support the seat. Castor legs will be mounted once the castor assembly is complete, this will assure us the chair is level. The cross members will be welded into place on the seat is mounted to suspension. This will allow us to confirm placement of the leg rests. The cross members will also give us the support needed to mount the motors.
Welding Frame
Castor Leg
20MAR2016- Fabrication of the wheelchair is in full swing. We have begun welding the frame, and machining the required components. Orders continue to pile in, and we anticipate having nearly 85% of required materials by the end of the week. Below is a few pictures of the production process.
Drilling a Hole in Cross Member
Reaming Axle Block
28FEB2016 – This week we will continue to work on the fabrication of the wheelchair. We will focus on mounting the suspension to the chair, and the frame. We have orders in place for the axle and castor blocks, which will allow us to complete the frame. Motors, controls, and other components have also been ordered, and should be shipped soon. Below is a picture of the frame tack welded together.
Fitting Seat to Frame
21FEB2016 – Our solidworks model is nearly complete, and we will print off a dimensioned drawing this week to assist in the production process. For the initial build, we will use tack welds to hold each member in place, as we ensure the proper fit of all pieces. Once each member is in place and of the proper fit, we will do complete welds. Our focus towards the end of the week will shift towards our mid term report due March 2nd.
14FEB2016- Our first order of metal was donated by Bangor Steel, and picked up on Friday February 12th. We placed orders for batteries, castors, hardware, and motors on February 15th. We hope to receive the components within the next few weeks. We are finalizing our frame design to ensure all of our frame components are the correct length before we being cutting the metal. If we begin fabrication during the week of February 22nd, we will have plenty of time to complete the build by spring break.
07FEB2016– As we wait for supplies to be ordered and shipped, we have shifted our focus to the electrical system. The complexity of independent drive motors, high current, and multiple joy sticks will take a significant amount of research and trail and error. We will identify all components and vendors by Feb 22, to ensure we have the supplies by spring break. We will also begin to develop the wiring harness, and the routes the harness will take. We also need to ensure the electronics are weather proof.
31JAN2016- This week we will begin the purchasing process for our frame, motors, and seat. This will be the start of our transition from design to the actual fabrication of our wheelchair. We have decided to change frame material from aluminum to steel. This will give us the required weight to lower the center of gravity of the wheelchair, making it more stable. With the added weight of steel, we need to verify our selected batteries and motors will supply enough power.
24JAN2016- The first week back we will map out the rest of our semester, up until presentations of our projects on Maine Day. We are aiming to order our frame materials by the end of the week. Drive system design is complete, and all part numbers have been identified at preferred vendors. We suspect there will be a considerable amount of testing to complete on the wheelchair, so we are aiming to have our prototype complete by March 4. This will allow us an ample amount of time to troubleshoot and test.
13DEC2015- Our team will finalize our caster design prior to departing for winter break. We will identify every component, and detail exactly how the casters will attach to the wheelchair frame. We will chose bearings that can uphold significant axial loads. We will also identify all components of the drive-train, and determine if the setup is satisfactory based on the loads it will see. We will also identify other donation sources we can contact while on break.
6DEC2015- The final week of the semester will be consisted of finalizing our report, and determining what work must be completed over the winter break. Our report will summarize what we have completed so far in our project, including design, fundraising, resource consumption, and future schedule. Once the report is completed, we will be able to identify where our focus should be aimed over winter break. Winter break assignments will include calculating more load cases, and identifying other components we may need, but have not included in the budget.
29NOV2015- Our team has run its preliminary FEA analysis to determine where our maximum deflections will occur. This will allow us to see where we will need to add additional support, or possibly change the design to limit the deflection and stress. We will also be adding more components to our solid model, which will allow us to develop our design further, and get exact dimensions. These dimensions will be used to build our wheelchair, and allow for us to calculate the stresses and forces on our wheelchair more accurately.
22NOV2015- Our team will focus on verifying our design is strong and safe. We will be determining forces and stresses our wheelchair will encounter while on the trail. This will allow us to determine a height, width, wall thickness, and material for our frame. We are striving to make the wheelchair as light as possible, but want to ensure it will be able to hold up to the rigorous terrain that will be found off-road. We will also be able to determine where our maximum stresses will occur, and will be able to add appropriate bracing.
15NOV2015- This week we will be drawing our initial design, with the main drive system components mounted. We will also finalize all calculations to determine the appropriate size of the motors. Research has begun for programming the motors and controllers, and looking at all the various electrical components. We will continue to investigate modifying existing chairs to support all-terrain use. Our search for donations is constantly evolving, and will be in contact with vendors regarding possible component donations.
08NOV2015- Our team met with an engineering mentor this week to help the initial design and schematic of our motors and controls. We also are researching our different battery options to find the option that best fits our clients needs. A few of the determining factors will be weight, battery life cycle, amp hours, and charging abilities and characteristics. We have identified several chairs that will provide comfort and safety to our clients, and will be visiting local vendors to personally test different types of seats.
01NOV2015– We will be finalizing our initial frame concept this week. We are determined to make the frame as light and strong as possible. We are interested in using 6061-t6 aluminum as a material to construct the wheelchair frame.
![](https://lh3.googleusercontent.com/-I0kwvUwNBP4/VjafFydJkoI/AAAAAAAAABc/wgN_PXRwqYI/s512-Ic42/Wheelchair%252520Front%252520view.png)
Initial Frame Concept
25OCT2015– We have focused our early semester weeks focusing on researching various components of electric wheelchairs, including motors, suspension,battery,controls,frames, and seats. We will be selecting components in the following weeks.
18OCT2015– Our group met with our professional engineer mentors this week to discuss our initial concept ideas. We will be in contact with our mentors frequently. This will ensure we are designing and fabricating the safest possible wheelchair. The off-road terrain will subject the wheelchair more rigorous forces, and we want to make sure our design will hold up in all conditions to keep Cody and his family safe.
MEET THE TEAM
I was raised in Frenchville Maine and attended high school in Madawaska Maine. After graduating I joined the Army and served four years Active Duty with the 82nd Airborne as a Combat Engineer, and Deployed to Afghanistan to fight for Operation Enduring Freedom. I started college in the spring of 2012 at the University of Maine, Orono, ME where I study Mechanical Engineering Technology. I began working an Internship at the Advanced Structures and Composites Center during that first fall semester. I spent three years helping with development of Offshore Floating Wind, and am now working to help launch a Thermoplastics manufacturing facility within a new building expansion. I am a member of the Senior Skulls Honor Society which allows me to be a representative of the college on behalf of the entire student body. I am also the President of Engineers Without Borders and have just submitted to begin a new program in Ecuador.
Engineering has been a passion of mine since I was very young. In high school, I attended a technical school in Massachusetts called Tri-County, where I took engineering classes during my four years there. I am currently a senior in the Mechanical Engineering Technology program at the University of Maine. I have interests in Computer Aided Manufacturing (CAM) and robotics. When I have free time, I enjoy using design software, and my 3D printer to design and make my own projects.
Michael OBrion
I was born and raised in Portland, ME, and graduated from Cheverus High School in 2010. I am a senior in mechanical engineering technology. I joined the Maine Air National Guard in April of 2013, where I am trained as a welder and machinist. I have always enjoyed working with my hands on trucks, snowmobiles, and anything else that has a motor, this passion led me to pursue a degree in MET. Outside of school I enjoy hunting, fishing, hiking, and spending time at our family camp.
![](https://lh3.googleusercontent.com/-kG8WVSXoVz0/VjayZFG_-MI/AAAAAAAAACI/4PCsJ8-t0Pc/s512-Ic42/Joseph%252520Farinella.jpg)
Joseph Farinella
I am currently a senior at the University of Maine at Orono pursuing a degree in Mechanical Engineering Technology. I am from Basking Ridge, New Jersey. I have experience from interning at Thomas Manufacturing in Jersey City and also at the Advanced Manufacturing Center, University of Maine, Orono, ME. Some of my interests outside of school include scuba diving, fishing, reading, volunteering at animal shelters.
SPONSORS AND DONORS
MAINEiacs Charities
-MAINEiacs Charities was founded in 1981 as the charitable arm of the Maine Air National Guard; with the mission of giving back to the communities we serve. We are staffed entirely by volunteers, meaning that 100% of net proceeds we receive are used to achieve our mission. Over the past 34 years, MAINEiacs Charities has provided both financial and non-financial support to the members of the Maine National Guard and their families, area Project Graduations, the Children’s Miracle Network, Veterans’ Homeless Shelter, numerous civic groups ranging from the Boy and Girl Scouts to Big Brother/Big sister and the Maine Veterans Homes along with individuals in need throughout our communities.
Our House
-The mission of Our House Inc. is to provide healthy and stimulating environments for people with developmental and other disabilities, through the provision of community residences, employment opportunities, social programs and other supports designed to help them achieve their full potential for living meaningful and productive lives; and to provide affordable housing for low income individuals, consistent with IRS guidelines for low income housing programs, as a means of relieving the poor and distressed.
Bangor Steel
– Bangor steel is a local metal distributor located at 123 Dowd Road in Bangor, ME. They have contributed to various projects in the greater Bangor area including the Center for Communication and Learning, Levant Elementary School, The Church of Jesus Christ of Latter day Saints, and various others. Bangor Steel was gracious enough to donate the steel required to build Cody’s wheelchair frame.
– Fastenal is a nation wide hardware and equipment distributor, located locally at 19 White Pine Rd, Pine Wood Business Park, Hermon, ME. Fastenal is dedicated to going the extra mile for their customers, and helping the local communities around them. We would like to thank Fastenal for donating the hardware needed to construct Codys wheelchair.
POC for this webpage is:
Michael O’Brion
Michael_Obrion@umit.maine.edu
Mechanical Engineering Technology
5711 Boardman Hall
Orono, ME, 04469